For the manufacture of the handle-shocker, we need
Lighter with a piezo element.
Tool:pliers, clerical knife.
Making a handle-shocker
So, let's disassemble the lighter and get the piezoelement.
This is how it looks. Posting is an electrode. And the second electrode is a round piece of iron on the body.
Remove some of the insulation from the wire with pliers.
Take the handle and unscrew it.
Make a hole from the side of the handle, with a hot needle, awl or paper clip.
We cut the flow of plastic with a stationery knife. Which was formed as a result of melting.
Now we need a wooden stick of a certain length.I took the sticks from the sushi set.
Insert it into the pen. It will play the role of a lever that will transmit a press from a button to a piezoelectric element.
Insert the piezoelectric element so that the bare end of the wire goes into the hole from the side.
If the wand came up, fix it with superglue or hot glue.
Next, trim the part of the cap to hide the entire filling.
Putting together the whole pen. You can put all the parts on the glue.
Check and test current shocks on yourself) Anyway, you need to be able to play, without any fanaticism.Consider the condition of the person with whom you are going to make a joke - all of a sudden he has a bad heart or he may not understand everything correctly and not adequately respond. In any case, all responsibility falls on you and only on you.