How to securely connect wires without soldering

I think many had to connect two stranded wires together. And most often people do the usual twist lived among themselves. The wire connected in this way has a low strength and, with a slight effort, the twist can unwind and the wire break. If there is a soldering iron on hand, the twisting is usually soldered and the strength of the connection becomes good. And what if the soldering iron is not at hand? How to make a high-quality twist and connect the wires properly?

How to securely connect the wires

Using a clerical knife or stripper, remove approximately 3 centimeters of insulation from each end of the wire.
How to securely connect the wires without soldering
Like this:
How to securely connect the wires without soldering
Now you need to fluff the wires in a small whisk.
How to connect securelywires without soldering
And here is the main point: these brushes need to be crossed with each other, so that the wires are maximally intermingled with each other. See photo:
How to securely connect the wires without soldering
The intersection should be approximately in the middle of the bare zone. Next, the wires after crossing, wind the right bare portion on the left.
 How to connect securely l wires without soldering
And left to right.
 How to securely connect the wires without soldering
The result should be such a reliable twist wires.
 How to connect the wires securely without soldering

Check

Fix one wire on the dynamometer and pull the other. You can easily create an effort of the order of 10 kg and the twist will not unfold, which is an indicator of excellent reliability.
How to securely connect the wires without soldering
Well, then we isolate them with heat shrinkage or ordinary electrical tape.
How to securely connect the wires without soldering
As a result, the wire has the same reliability almost as whole. Use your friends! For motorists, this will definitely come in handy, as it did to me more than once. I am sure that now you will definitely take this method into service and use it for the rest of your life, of course, if you need it. Of course with the soldering, the wire will be more reliable , but as they say, what is not, is not. And if you know the way more reliably - write it in the comments, I am sure it will be interesting for everyone to learn from your experience.

Date: 09.10.2018, 16:52 / Views: 32544

Related News


Build an original decoration for your summer house from an old tea set
Labels and miniature cards for gifts
Tomato Juice Recipe
Pen Shocker
How to make a rakolovka