How to make a huge LED LED

Have you ever held a huge LED, the size of a human fist? Of course not, because they do not exist. I will show how to make such an original thing with my own hands. This LED LED will look exactly like its little brother, except that it will have much more luminous brightness.

You will need

  • Plastic bottle.
  • Textolite board, foil.
  • Thick wire.
  • A piece of LED tape.
  • Resistor 5-10 Ohm.
  • Epoxy resin with hardener.
How to make a huge LED LED

Making a large LED

So, let's start with what the LED consists of. The first is the two leads that go into the body of the LED. Then you can see two sites, one smaller one - this is the anode, and the other one is the cathode. At the cathode is a platform with a reflector and a semiconductor crystal. Above all this there is a lenswhich is a monolith with LED body.
How to make a huge LED
First, let's make an imitation of a large semiconductor crystal with a reflector. Take the LED strip and unsolder chip elements from it. If there is no hair dryer, heat it with a soldering iron.

width="480" height="270" src="https://www.youtube .com / embed / TnhNXWrDu00? feature = oembed "frameborder =" 0 "allow =" autoplay; encrypted-media "allowfullscreen>
Date: 08.10.2018, 13:21 / Views: 63442

Related News


Flower for curtains
Technology and types of laser metal cutting
Surface Decor in the Spot Painting technique
5 Ways to Make Chic Curls at Home
Cleaner for the kitchen and everything will shine like new
How can you grow a real lemon
Walking clock yourself